Applications

• Complete system integration – The OME-SW21-TX-WPC and OME-SR21 or OME-EX-RX together provide a compact, yet comprehensive and cost-effective integration solution.
• Remote AV source connections – This transmitter is ideal for extending AV connectivity from an OME-PS62 in a central equipment rack to lecterns as well as remote wall and table or floor box locations, where presenters can easily access the system.
• Video conferencing – The OME-SW21-TX-WPC and a compatible Omega Series receiver or switcher are ideal for soft codec and web-based conferencing applications, with the ability to integrate with PCs, cameras, speakerphones, and microphones.

Technical Features

2×1 HDBaseT switcher with USB-C* and HDMI inputs

• Immediate compatibility with laptops and tablets with USB-C ports supporting AV
• No need to provide USB-C to HDMI video adapters
• * USB-C port does not support device powering.

Video, audio, power, and data over category cable utilizing HDBaseT technology

• Transmits 4K/UHD video up to 330 feet (100 meters) with CAT6/6a/7 cable, or up to 295 feet (90 meters) using CAT5e cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

USB 2.0 interfacing and extension* up to 330 feet (100 meters)

• USB-C and USB type B interfaces for connection to host PCs, plus a USB type A port for a peripheral device such as a microphone, speakerphone, or a keyboard and mouse
• Supports USB 2.0 devices, USB 3.0 devices compatible with USB 2.0, and legacy USB 1.x peripherals
• Provides an ideal USB integration solution for software video conferencing and other applications
• * A maximum 120 Mbps data rate is supported, due to specific USB bandwidth limitations over HDBaseT.

US one-gang enclosure for wallplate openings – interchangeable black or white trim kits

• Allows inconspicuous installation on a wall, in furniture, or in a table or floor box. Includes black and white wallplates and faceplates.
• Meets end user requirements for conveniently accessible yet discreet AV connectivity

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

• Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
• Supports video data rates up to 10 Gbps from PCs, media players, and Ultra HD Blu-ray players

HDCP 2.2 compliant

• Adheres to latest specification for High-bandwidth Digital Content Protection*
• Allows protected content stream to pass between authenticated devices
• * HDBaseT receiver or switcher must also be HDCP 2.2 compliant.

Remote powering over HDBaseT

• Industry standard IEEE 802.3af PoE is supplied by an Atlona receiver or switcher over HDBaseT
• Allows convenient wall, table or floor box, or furniture installation without the need for local AC power

Automatic display control

• Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
• Embedded, comprehensive selection of display drivers from the Velocity™ System driver database
• Enables display and volume control. CEC enables control of consumer displays (as supported by the display manufacturer).
• Includes an adjustable lamp cooldown mode to avoid prematurely powering up a projector after shutdown
• Enables effortless, automated system operation without the need for an external control system

Automatic input selection using hot plug detect and video detection technology

• Selects active input when sources are connected or if there is a change in source power status
• Enables simplified, automatic system operation without user intervention

Multi-channel audio compliant

• Passes through multi-channel audio formats from the HDMI or USB-C inputs
• Supports PCM, Dolby^® Digital, Dolby Digital Plus™, Dolby TrueHD, DTS^® Digital Surround™, and DTS-HD Master Audio™

EDID management

• Manages EDID communications with the source through a display’s EDID or internally stored EDID
• Ensures desired audio formats and video resolutions are provided to the AV system

HDCP management

• Automatically reports HDCP compliance status to the source based on the sink device
• HDCP compliance can be disengaged through Velocity or other control system
• Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted

Integrated HDBaseT link status monitoring

• Tests integrity of the HDBaseT cable link between the transmitter and the receiver
• Web GUI provides real-time link status
• Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality

Intuitive GUI-based configuration using integrated web server

• Offers menu-based configuration of device settings including network access, input switching, display control, HDCP and EDID management, and more
• Allows fast configuration of internal product settings and troubleshooting from a mobile device or PC in the field

TCP/IP and RS-232 control

• Flexible control options for compatibility with Atlona Velocity™ and third-party control systems
• TCP/IP control available through a compatible receiver or HDBaseT-equipped switcher – such as the OME-EX-RX, OME-SR21, or OME-PS62
• Reduces integration time and costs

Easy to configure and manage with Velocity Device Manager

• Centralized, network-based configuration and management of Atlona IP-controllable products and systems
• Manage configuration and firmware updates for AV devices spanning a facility, building, enterprise, or residence
• Available as a part of Velocity control systems or as a free virtual machine software download

Field-updatable firmware

• Device can be updated in the field via the web GUI or Velocity Device Manager
• USB port also available for firmware updates

Front panel power and signal status LEDs

• LED indicators provide power and HDBaseT link status information
• Provides local, convenient setup and troubleshooting when network access is not available

Included accessories

• Installation guide
• Interchangeable black and white wallplates and faceplates
• 2 meter (6.5 foot) USB-C male-to-male cable (USB 3.1 Gen 1)