Squid Ink Aquaphobe V2 – PTFE Infused Wax (Bubblegum Scent)

Squid Ink Aquaphobe V2 is the next evolution of our exclusive and hugely popular PTFE-infused car wax.

Blended in-house at Squid Ink HQ, this improved version features enhanced water behaviour, stronger hydrophobics and longer durability — offering up to 3–6 months of protection on a well-prepared surface.

Despite being technically a hard wax, Aquaphobe spreads like a buttery paste, making it easy to apply and remove. Once cured, it leaves a mirror-like gloss finish and impressive resistance against dirt, moisture, and UV damage.

Finished in a deep blue colour with an unmistakable Bubblegum scent, it’s as enjoyable to use as it is effective.

✨ Key Benefits:

• PTFE-infused formula for exceptional water repellency
• Durable protection lasting 3–6 months
• Deep, mirror-like gloss finish
• Spreads easily and buffs off effortlessly
• Signature Bubblegum fragrance
• Expertly handmade in-house by Squid Ink Detailing

🧴 Directions for Use:

1. Ensure paintwork is clean, dry, and fully decontaminated before application for best adhesion.
2. Using a foam applicator, apply a thin, even layer of Aquaphobe to 1–2 panels at a time.
3. Allow to cure for approximately 5 minutes (time may vary with temperature and humidity).
4. Buff to a flawless shine using a Weever tight weave or Purple Haze microfibre cloth.
5. For maximum protection, apply a second coat 1–12 hours later to enhance polymerisation and deepen gloss.

Tip: Avoid applying in direct sunlight or on hot panels. Always apply thin, even coats for the best results.

⚠️ Safety & Storage:

• Keep out of reach of children.
• Use PPE when handling chemicals.
• Store in a cool, dry place below 30°C — do not freeze.
• Can cause serious eye irritation — rinse with plenty of water if contact occurs.
• If swallowed, seek medical advice immediately — do not induce vomiting.
• Full MSDS available on our website.

Sold in 50ml tins.