T34022 5-pack of 3" x 79" Zirconia Sanding Belts–100-Grit

100-grit replacement sanding belts for your knife grinder.

Made with premium zirconia abrasive grains, the T34022 100-Grit 3" x 79" Sanding Belts are a great choice for grinding and shaping metal.

Zirconia abrasive excels in fast material removal and achieving desired finishes, making it ideal for aggressive sanding and heavy stock removal.

100-grit paper is a moderately fine abrasive used for further refining surfaces after initial sanding. It helps smooth out imperfections and is suitable for light material removal. This grit level provides a good compromise between smoothing and maintaining a decent material removal rate.

It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.

The 3" x 79" size is ideal for use on knife grinders–especially on the Grizzly G0972 Belt Knife Grinder.

Within the belt thickness rating system, the Y-weight backing that gives the sanding belt its structure is the most heavy-duty.

Built to last, the added strength of this backing ensures that the belt stays in place and doesn't wear out too quickly, even with heavy use.

The Y-weight backing has the most strength to withstand the pressure of heavy sanding and product removal, can be run in either direction, and is flexible for easy contouring and shaping of your knife edges.

The Grizzly Customer Service and Technical Support Teams are U.S.-based.

Additional sanding belts are available both online and in store and are shipped from both Grizzly warehouses in Springfield, MO and Bellingham, WA.

Made in the USA

SPECIFICATIONS:

• Grit: 100
• Size: 3" x 79"
• Quantity: 5
• Paper weight: Y
• Abrasive grain: Zirconia

FEATURES:

• Full resin bond
• Bump free tape seam
• Runs in either direction