Use Spectracide Weed Stop For Lawns Plus Crabgrass Killer₃ (Ready-to-Use) to kill over 470 types of weeds as listed, including crabgrass. The product produces visible results in 5 hours. This product kills broadleaf and troublesome grass weeds including dandelion, chickweed and clover as well as crabgrass, foxtail and yellow nutsedge, see product label for complete list of weed types. Apply when daytime temperatures are between 45°F and 90°F. Do not apply to Bermudagrass when daytime temperatures exceed 85°F.

• Kills yellow nutsedge
• See results in 5 hours
• Kills over 470 weed types as listed, including crabgrass
• Kills the root
• Won't harm lawns when used as directed

ACTIVE INGREDIENTS

HOW TO USE

1 Gallon container

BEFORE USE

1. Shake well before each use.
2. Open flip-top closure.
3. Remove sprayer from its slot beneath the bottle handle and unwrap the tubing. Pull hose plug to completely extend tubing.
4. Firmly press hose plug into opening in cap until it snaps into place.
5. Slide switch on hose plug counter-clockwise to “OPEN.”
6. Adjust nozzle to desired setting, SPRAY or STREAM.
7. Hold sprayer below the level of the container and prime by pumping trigger several times until product is dispensed.
8. Spray unwanted weeds until completely covered.

AFTER USE

1. To store, turn sprayer nozzle off.
2. Turn hose plug switch clockwise to “CLOSED.”
3. DO NOT disconnect hose.
4. Return sprayer to its slot. Hose can be pushed back into sprayer handle.

32 fl oz container

1. Turn nozzle to coarse spray pattern. Avoid sprays that are too fine because they can drift and damage other plants.
2. Spray unwanted weeds until completely covered.