Complete Shaft

Shear bolt Yoke
Designed to shear the bolt, when the driveline comes under extreme stress preventing severe damage to the driveline. Ideal for circumstances where driven implement may comes to a complete, sudden stop, or where the turning angle of the driveshaft is exceeded.

Quick-Release Coupler
For both tractor and implement ends. To fit standard 1 3/8" x 6 spline drive shafts. Totally secure, yet quick & easy to hitch/unhitch.

Telescopic "Bell" Shaft
With a minimum end-to-end distance of 1350mm, extends to suit distance required for implement. "Bell" tube profile for moderate to heavy loads.

Fully Shielded
Shaft is complete with a FULL Safety Shield. Do not operate the driveline if shielding is not in place. Shaft Guard must turn freely on the driveline.

IMPORTANT
Refer to User Manual for instructions on greasing, shortening and general use.

Technical specification

• Tube Type: Tri-Wall/Bell
• Outer Tube Thickness: 53.6mm
• Outer Tube Wall Thickness: 3.6mm
• Inner Tube Thickness: 44.7mm
• Inner Tube Wall Thickness: 5.5mm
• Closed Length: 1350mm
• PTO Stub Fitment: 1 3/8" x 6 Spline