Bona Craft Oil 2K  Performance, Versatility and Design Introducing new Bona Craft Oil 2K - all the benefits of a natural oil finish plus the performance you expect from Bona. The enhanced open time of Bona Craft Oil 2K along with its ability to set up quickly makes it easier to work with and allows for light use in just 8 hours. While the unsurpassed viscosity penetrates deep into the hardwood floor in truly just one coat resulting in strengthened wear resistance and an organic looking floor with a rich patina. Blend or apply two tones for a custom look plus further protect a homeowner's investment by over-coating with any finish in the Bona Traffic family.

SANDING AND PREPARATION OF NEW FLOORS: 1. Sand and prepare floor using accepted
industry association methods. 2. Make your final cut with 80 to 120-grit paper then multidisc with
120 to 150-grit paper. 3. Use a Tampico Brush on a dust containment buffer and vacuum
thoroughly. 4. Tack with a dry Bona® Microfiber Mop or cloth. 5. Apply Bona Craft Oil 2K.

THE BONA CRAFT OIL 2K SYSTEM: Bona Craft Oil is designed to penetrate and seal bare wood
in a single coat. In some instances a second application may be necessary for even coverage and
color appearance. Other Bona Craft Oil 2K colors may be mixed together to create custom blends.
Visit bona.com for additional product information.

RECOMMENDED APPLICATORS: Red buffing pad, Bona Steel Trowel, squeegee, cut-in pad, 2"
paint brush and Bona Cotton Cloths.

MIXING INSTRUCTIONS: 1. Using a hammer, drive a screwdriver through the top and bottom of
the upper container (Part B) and allow the hardener to completely empty into the bottom container
(Part A). 2. Remove the lid and mix the content thoroughly. To mix smaller amounts of Bona Craft
Oil 2K, use a 1:9 ratio. BONA CRAFT OIL 2K CANNOT BE REHARDENED. STIR WELL BEFORE
USING. DO NOT THIN.