ARO — Hand Drum Pumps — Pump, Air Drum, 2 to 1

ARO Hand Drum Pumps built for consistent performance in maintenance, inspection, and replacement work.

Quick specs

• Item: Air Operated Drum Pump
• For Media Type: Acetic Acid, Ammonia, Antifreeze, Automatic Transmission Fluid, Bleach, Brake Fluid, Chromic Acid, Citric Acid, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formic Acid, Glycerin, Heptane, Hexane, Hydraulic Oil, Hydrazine, Ketones, Methyl Chloride, Motor Oil, Nitric Acid, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Stoddard Solvent, Toluene, Water, Xylene See More
• Max. Flow Rate: 4 gpm
• For Container Size: 55 gal
• Manufacturer Part Number: NM2202B-41-731
• UPC: -

Product information

• Country of Origin: United States
• Manufacturer Part Number: NM2202B-41-731
• UPC: -

Dimensions

• Air Inlet Size: 1/4 in FNPT
• For Container Size: 55 gal
• Inlet Size: 1/4" FNPT
• Suction Tube Length: 33 11/16 in

Details

• Includes Suction Tube: Yes
• For Use With: Adhesives, Anti-freeze, Lacquers, Solvents, Varnishes, Water and Water-based Fluids
• Discharge Tube Outlet OD: 3/4 in
• Type: Drum
• Seal Material: PTFE
• Delivers: 1000 CPS
• Max. Flow GPM: 4
• Metered: No
• Housing Material - Pumps: Stainless Steel
• Includes Nozzle: No
• Not Recommended Chemicals: Ammonium Hydroxide, Biodiesel, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Cyclohexane, DEF, Deionized Water, Diesel Fuel, E85, Ethyl (Ethanol), Fertilizers, Fungicides, Gasoline, Herbicides, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Naphtha, Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Salt Water, Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Trichlorethylene (50%), Turpentine, Windshield Washer Fluid See More
• Includes Discharge Hose: No
• For Container Type: Drum
• Compatible Chemicals: Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Antifreeze (Coolant), Automatic Transmission Fluid, Brake Fluid, Chromic Acid 5%, Citric Acid 50%, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Formic Acid, Fresh Water, Glycerin, Heptane, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Potassium Hydroxide (50%), Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Toluene, Xylene See More
• Power Source: Air
• Includes Spout: No
• Gear Lube: NT
• Item: Air Operated Drum Pump
• For Media Type: Acetic Acid, Ammonia, Antifreeze, Automatic Transmission Fluid, Bleach, Brake Fluid, Chromic Acid, Citric Acid, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formic Acid, Glycerin, Heptane, Hexane, Hydraulic Oil, Hydrazine, Ketones, Methyl Chloride, Motor Oil, Nitric Acid, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Stoddard Solvent, Toluene, Water, Xylene See More
• Max. Flow Rate: 4 gpm
• Max. Viscosity: 1,000 cps
• Wetted Materials: PTFE, Stainless Steel

This Hand Drum Pumps is selected for dependable day-to-day use.

Recommended for inventory replenishment and standardization and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.
• Organized for straightforward purchasing and stocking.

Notes: Verify measurement standards, tolerances, and compatibility with existing assemblies before purchase.