ECOFILM^SET 1000mm Underfloor Heating Element

ECOFILM^SET underfloor heating elements offer a fast, clean and efficient installation method with no requirement for screed or self-levelling compound, making them ideal for renovation and retrofit projects.

The ECOFILM^SET 1000mm Underfloor Heating Element is an ultra-slim carbon film system designed specifically for floating floors. It provides a dry installation solution where floor height must be kept to a minimum.

The system is available in multiple widths and standard lengths up to 10m. Each element can be trimmed on site where required and is supplied with pre-wired 5m cold tails for straightforward installation. Two outputs are available — 130W/m² for general living areas and bedrooms, and 160W/m² for higher heat demand areas such as conservatories.

This radiant heating technology delivers gentle, even warmth across the full floor surface. The heating film itself can reach operating temperature in as little as 15 seconds, with noticeable warmth felt underfoot within 20–30 minutes. Full room temperature is typically achieved within 1–2 hours, depending on insulation and room heat loss.

Best Flooring Types for ECOFILM^SET

ECOFILM^SET is primarily designed for:

• Laminate flooring
• Engineered wood flooring
• Carpet and vinyl (when used with overlay boards)

When installing under softer floor finishes such as vinyl or carpet, a protective build-up such as ECOMAX-DUO overlay boards is required. For full guidance, see our Underfloor Heating Overlay Board Guide.

Important: This system is designed for dry areas only and must not be installed in bathrooms or wet rooms.

Performance & Efficiency

To achieve the best results, ECOFILM^SET should always be installed over a suitable insulation layer such as ECOMAX-LITE insulation boards or thermal underlay. This helps reduce heat loss and improves warm-up time.

You can estimate your heating requirements using our Underfloor Heating Calculator.

To compare systems, visit our Electric Underfloor Heating Systems Collection Guide.

For deeper technical guidance, see our Carbon Film Underfloor Heating Guide and Carbon Film Running Costs Guide.

Key Features

• Dry installation – no screed or levelling compound required
• Ultra-low build height (under 7mm)
• Even heat distribution across the entire floor
• Suitable for laminate and engineered wood floors
• Compatible with vinyl and carpet using overlay boards
• Fast installation with pre-wired heating elements
• Available in 130W/m² and 160W/m² outputs
• Ideal for renovation and retrofit projects

Recommended Installation Components

• ECOMAX-LITE insulation boards – improve efficiency and reduce heat loss
• ECOMAX-DUO overlay boards – required for vinyl or carpet installations
• Flexel Touch WiFi Thermostat – smart programmable control
• Heatmiser Slimline-E Thermostat – simple and reliable control

FAQ’s

How quickly does ECOFILM^SET underfloor heating warm up?

The heating film can reach operating temperature within seconds, with warmth typically felt through the floor within 20–30 minutes. Full room temperature is usually achieved within 1–2 hours depending on insulation.

What flooring can ECOFILM^SET be used with?

It is designed for laminate and engineered wood floors. Vinyl and carpet can also be used when installed with suitable overlay boards.

Do I need insulation under ECOFILM^SET?

Yes. Insulation improves efficiency, reduces heat loss, and ensures faster warm-up times.

Is ECOFILM^SET suitable for bathrooms?

No. This system is designed for dry environments only. For bathrooms, foil or heating mat systems are recommended.

Can ECOFILM^SET be used as primary heating?

In well-insulated rooms, it can act as a primary heat source. In other cases, it is often used as supplementary heating.

Do I need a thermostat?

Yes. A programmable or smart thermostat is essential for controlling temperature and improving energy efficiency.

Eco Friendly Heating & Flooring specialise in supplying efficient electric heating systems designed to improve comfort while supporting lower energy use in modern homes.