Compatible models: HONDA (CBR600RR, CBR600RRSE, CB400SB, CB400SF, CB400SS, FTR), YAMAHA (XJR400R, SR400, Tricker, TW225), SUZUKI (GSR400, Impulse, ST250, Glass Tracker, Bang Bang )
KAWASAKI (ZRX, Zephyr

◆Completely wraps around the vehicle body! A fully covered bike cover with a new idea. ■A cover that completely wraps around your bike. ■Highly breathable fabric is used on the top of the cover to prevent stuffiness inside. ■Shuts out ultraviolet rays, yellow sand, and dust. ■Prevents cat intrusion. ■The zipper can be opened and closed at just the right position, making it easy to put on and take off the cover.・Adopts side belts The side belts reduce flapping caused by the wind. Bike barrier size chart (unit: cm) [Type 1] Overall length: 210, Overall height: 140, Overall width: 100, Rear width: 95[Type 2] Overall length: 230, Overall height: 140, Overall width: 100, Rear width: 105[ Type 3] Total length: 230, Height: 140, Width: 100, Rear width: 105 [ Type 4] Total length: 230, Height: 160, Width: 100, Rear width: 110 [ Type 5] Total length: 251, Height: 155 , Overall width: 110, Rear width: 105 [Type 6] Overall length: 270, Overall height: 155, Overall width: 110, Rear width: 135 *The dimensions of overall length, overall height, overall width, and rear height are guidelines for the size of the applicable section (class). . The above is the standard type, and vehicles equipped with optional parts such as large shields and sissy bars are not compatible. 1. Place a mat on the lower seat and place the bike on the line. 2. Place the cover over the top and close the zipper. 3. Close the rear zipper and use the magic marker to close the lid. 4.Secure it with a belt from the side to prevent it from flapping due to the wind. 5. Completed (Please be sure to lock the door to prevent theft). rb・Cover upper part 100% polyester raw cloth/Flame retardant product and silver coating processed product 100% polyester techno raw cloth/4-ply structure, 2-ply gray color (high moisture permeability)・Cover lower part polyester canvas No. 6, green color/zipper body, #10 number (wide and easy to open and close)/rear of the zipper, #5 number, black color/rubber mat Precautions for use *Due to the structure, we have taken measures against left-sided tilting (the right side is higher and the left (Left stand specification with low left side) *The muffler becomes very hot after the engine is stopped. Never call immediately after. *Please be sure to lock your bike to prevent theft. Another method is to use a chain lock, open it a little, and use an external pillar. *Please refrain from using this product during typhoons, in the valley between buildings, or during strong winds near the coast, as the friction caused by the wind may damage your bike. Be careful of salt stains on the zipper (salt damage). *Do not use near fire. Please be especially careful about smoking when putting on and taking off. *Although it is highly waterproof, it is not immune to water leakage due to long periods of rain, strong winds, rain, etc. At that time, dry the entire cover thoroughly. There is also some water seepage through the perforations. *The zipper uses a large coil-shaped zipper. Please use it smoothly and avoid strong twisting or pulling. Never step on the zipper with your bike or your feet. *There are compatible products depending on the type of bike. Please use a cover that matches the size of your bike. *There is a line drawn on the rubber mat, so please use it as a guide when deciding where to stop. Please note that the parking location will change depending on the vehicle type. (The line is assumed to be fixed on the side stand.) *To prevent the cover from flapping and flapping, please use two yellow belts and fasten them with buckles.


Manufacturer: ‎Hirayama Sangyo
Brand: ‎Hirayama Sangyo
Packing size: ‎62.2 x 31.6 x 29.6 cm; 10.98 kg
Manufacturer reference: ‎FN47278
Color : ‎Silver, Black
Item weight: ‎11 Kilograms