K1C, Champion of Speed & Skills

Clog-free Extruder Kit with Quick-swap Nozzle
1st print, 2nd print, until you lose count. K1C always has your back.

Robust Extruder, Enhanced Reliability, 1000 Hours Of Clog Free Extrusion.
The extruder of K1C is enhanced with a bolster spring and a ball plunger. It grips on filament tightly without slackening off.

Tri-metal "Unicorn" Nozzle, Quick to Swap
The durable steel-tipped copper nozzle is integrated with a titanium alloy heat-break.
It blocks heat-creep and can be swapped super easily.

• One-handed Swap.
• Great Durability.
• Smooth Feeding.

Cooling Trio, Refining the Print Quality

1. Hot End Fan for Minimal Heat Creep: Hardly any heat creeping up from hot End to the extruder. It avoids pre-mature filament melting during the feeding flow.
2. Part Cooling Fan for Instant Hardening: A strong wind hardens the fresh extrusion via a special air duct. It catalyzes layer bonding and refines layer texture.
3. Auxiliary Fan for Overall Print Quality: An extra fan is on the chamber’s side to assist the model cooling. It minimizes string and warping for bridges and overhangs.
   

The weight of the printhead fans is dynamically balanced.
So they are less likely to wobble, minimizing ringing or ghosting.

Carbon Fiber Filled Filaments Brought into Play
K1C can make use of CF filaments, which are widely used in industrial printing for their mechanical strength and resistance to wear, deformation, and aging.

Why does K1C support so many filaments?

• 300° Hot End + Hardened Steel Nozzle Tip: Print with high-temp and wear-resistant filaments.
• PEI Flexible Plate Sticky to various materials: Able to release 3D models with a slight bend.
• Enclosed Design: Creating a constant high-temperature environment to forge stronger.

Carefree & Smart Operations from Start to Finish
Highly automated except for a few taps. K1C is simple to use just like a smartphone.

Out of the Box Experience
K1C is well assembled and tested before shipment. After unboxing, it is ready for plug and play. The boot-up guide is similar to that of a new smartphone.

Auto Calibration with One Tap
Give it a tap and walk away. The auto calibration gets everything ready for you.
Bid farewell to the frustrating leveling test with paper.

AI Camera Acts as Your Eyes
The built-in AI camera can watch over the printing, and will actively alert you when an error occurs. Also great for video monitoring and time-lapse filming.

Champion of Speed

Proven to Be Super Fast
K1C inherits the lightweight and agile CoreXY system of the K1. It offers a thrilling speed while retaining the print quality.

• Max Speed of 600mm/s
• Max Acceleration of 20000mm/s²

Contemporary Style.

Solid Frame Using Die Cast Parts
The frame adopts bigger parts made by integrated die casting. With fewer seams, it looks neat and becomes utterly sturdy.

Glass Door and Transparent Sides
Acrylic sides & lid with a glass door form a stylish thermal enclosure. They are transparent to reveal what's going on inside.

Pleasant Air While Printing
K1C employs an active carbon filter to purify compounds and particles arising from molten filaments. Therefore, printing materials like ABS can be done in a confined space.

Quieter Than Ever
K1C allows you to opt for a speed & noise level for printing. In silent mode, it sounds like turning pages in a book. No more distraction from work or rest. 

• Silent Mode: ≤45dB

Partial Failure? Just Skip It
No more worry when an individual print fails in batch printing, as you can exclude the partial failure from the batch.

Details

• Pre-installed Damping Pads: Fewer vibrations of the 3D printer.
• Silicone Wiping Strip: Cleaner to wipe the nozzle tip.
• Anti-shatter Film: Lower odds of glass shattering.
• Reinforced Cable Chain: Less likely to get loose, and more durable.
• Reliable Damper Hinge: Controlled door movement, less door slamming.
• Side Spool Holder: (Offered as a 3D model file) Filament becoming more accessible and visible.

Specifications

Printing Technology: Fused deposition modeling

Build Volume: 220x220x250mm

Product Dimensions: 355x355x482mm

Package Dimensions: 441x441x578mm

Net Weight: 12.4kg

Gross Weight: 16kg

Printing Speed: ≤600mm/s

Acceleration: ≤20000mm/s²

Printing Accuracy: 100±0.1mm

Layer Height: 0.1-0.35mm

Extruder: Dual-gear direct drive extruder

Filament Diameter: 1.75mm

Nozzle Diameter: 0.4mm

Nozzle Temperature: ≤300℃

Heatbed Temperature: ≤100℃

Build Plate: PEI flexible build plate

Leveling Mode: Hands-free auto leveling

File Transfer: USB drive, WiFi

Display Screen: 4.3" color touch screen

AI Camera: Yes

Power Loss Recovery: Yes

Filament Run-out Sensor: Yes

Air Purifier: Yes

Input Shaping: Yes

Lighting Kit: Yes

Sleep Mode: Yes

Rated Voltage: 100-120V~, 200-240V~, 50/60Hz

Rated Power: 350V

Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF

Printable File Format: G-Code

Slicing Software: Creality Print, Cura 5.0 and later version

File Formats for Slicing: STL, OBJ, 3MF

UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese