Overview

This dual‑monitor HDMI KVM switch lets you control two computers or laptops using a single keyboard, mouse and two monitors. It supports extended, duplicated or split displays when your computers provide two native HDMI outputs each.

Setup & compatibility

Hardware must support two simultaneous native HDMI outputs and mirror/extended modes — the KVM cannot increase the number of video outputs on your device. Connect as follows: HD IN1A + HD IN1B + USB IN1 = PC1, HD IN2A + HD IN2B + USB IN2 = PC2; HDMI cables are not included.

Tips & troubleshooting

This unit does not include EDID emulation, so you may need to reconfigure display settings after switching sources. For best results use good‑quality HDMI cables and a standard wired 104‑key USB keyboard and a 2 or 3‑button wired USB mouse; wireless and some mechanical peripherals can be less reliable. If a display or USB device isn’t recognised, check that both HDMI outputs on your computer are active and that the USB IN cable is correctly connected to the host.

• Control two PCs with one keyboard, mouse and two monitors
• Supports dual HDMI per PC for extended or mirrored displays
• 4K 60Hz HDMI for high‑resolution output
• USB 3.0/2.0 switching for shared peripherals
• No EDID emulation — manual display reset may be needed