PURGE RTU — pH-Neutral Iron & Fallout Remover (Ready-To-Use)

PURGE RTU is D-TAIL LAB’s pre-mixed, pH-neutral iron remover with color-change technology that targets embedded iron and brake dust on paint, glass, plastics, and wheels—no dilution, no mixing, just spray and rinse.

What PURGE RTU Does

Dissolves ferrous contamination that routine washing can’t remove, helping prevent clear-coat deterioration and corrosion. The purple color shift shows when iron is breaking down so you know when to rinse.

Why You Need PURGE RTU

• Ready-to-use convenience — optimized strength straight from the bottle.
• Safe & effective — pH-neutral formula with visual color-change feedback.
• Deep decontamination — restores slickness and shine before protection.
• Versatile — for paintwork, wheels (cool), exterior glass, and gloss plastics.

Where to Use It

• Clear-coated paint and PPF (spot test first)
• Wheels (only when cool); avoid direct spray on calipers/brake components
• Exterior glass and gloss plastics

Directions

1. Work on a clean, cool surface out of direct sun. Shake well.
2. Spray PURGE RTU generously onto the target area.
3. Allow 2–5 minutes of dwell, or until the purple color change indicates activity.
4. Rinse thoroughly with water/pressure washer.
5. If needed, follow with physical decontamination using a clay towel, then apply your protection.

Compatibility & Care

• Do not use on hot panels or in direct sun; never let the product dry on the surface.
• Always test in an inconspicuous area, especially on sensitive trims and matte finishes.
• After decon, rinse thoroughly and re-apply your preferred protection.

Pairs Well With

• Synthetic Clay Towel 3.0 — physical decon step after PURGE RTU.
• 500 ml PET Clear Bottle with Sprayer — dedicated sprayer for wheel/paint decon.
• Edgeless 420 GSM Microfiber Towels — safe wipe-off and final buff.