Product Description:

Wera Click-Torque pre-set (adjustable) wrench, the perfect choice for all bolting applications where the same torque and repeat accuracy is required.

Click-Torque pre-set wrench in unmistakable, robust Wera design, with an ergonomic two component handle, for superior comfort and grip. Delivered pre-set at lowest torque value in the range (10Nm), this can be adjusted however in three simple steps.
1. Remove the cap at the top of the handle. 2. Loosen the hexagon socket screw with a 5mm hex-key. 3. Finally turn the adjusting screw using a slotted screwdriver. Clockwise rotations will increase the torque value and counter clockwise rotations will decrease the torque value. The actual torque value must then be checked with a suitable testing device, after adjustment tighten the hex screw back up (We do strongly recommend having the torque setting done via our Wera torque service). For accurate measurement results operate the torque wrench with the hand placed in the middle of the handle; when the pre-set torque value is reached, an audible and tactile release mechanism will trigger preventing any chance of you overtightening the desire torque value. Exactly precise to ± 2% (as per DIN EN ISO 67892:2017-07), for accurate clockwise and anti-clockwise torque-controlled tightening.

9x12 mm drive for interchangeable insert tools. Measuring range: 10-50 Nm.

Contents:

1x Click-Torque XP 2 pre-set adjustable torque wrench for insert tools,. 9x12 mm drive: 10-50 Nm