Lithofin KF Tile Polish forms a film that gives dull, matt and rough surfaces an elegant sheen once dry. Dirt will no longer penetrate into the surface and can easily be wiped away. Rough surfaces become smoother and therefore easier to maintain. The film protects the surface, while at the same time enhancing its appearance by slightly darkening the colours. Existing marks of wear and tear are masked and become less visible.

Lithofin KF Tile Polish has been specifically developed for unglazed ceramic surfaces, such as quarry and clay tiles. The surface film enhances the appearance and facilitates maintenance.

Lithofin KF Tile Polish is not recommended for outdoor areas or for surfaces subject to heavy wear and tear. Not suitable for glazed and polished tiles.

It is a solvent free acrylate sealant that can be diluted with water and is easy to use.

Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 9
Appearance: milky-white
Odour: nearly odourless

Directions for Use:
The surface must be clean and completely dried out. Pre-treating the surface with KF Stain Stop is recommended. Remove dirt deposits and old care product residues with a suitable Lithofin Cleaner. Evenly apply Lithofin KF Tile Polish in undiluted form using an applicator, sponge or lint free cloth. The product may be used diluted with water, if the surface is not very absorbent. The amount of product to be applied depends on the absorbency of the tile; make sure you leave a clearly visible film of moisture on the surface. A second coat can be applied, if needed. Always test in an inconspicuous area prior to use.

Drying Time: surface will be dry after approx. 40 to 60 minutes, depending on temperature and humidity.

Coverage:
Approx. 15 to 20m² per litre depending on surface.

Further Care:
Occasionally add the product to the cleaning water (one cup per ten litres) to touch up and maintain the protective film.

Storage:
Closed and cool, frost free. Shelf life of up to 3 years.