INJORA Brushless Micro MBL32 ESC & 1721 Purple Viper Motor for 1/18 TRX4M

Note:

• The motor is only compatible with: 1/18 TRX4M, 1/18 Redcat Ascent18
• Not compatible with 370 gearbox!
• The ESC is compatible with most of the receiver and remote combinations that with CH2
• Never plug the battery upside down, otherwise the ESC will immediately burn out！
• Please program the ESC according to the motor specifications! Programming Tutorial 
• Instruction Manuals

If your transmitter does not control the car well, please try these:

1. If you are using a 2S battery, please set the BEC output to 6.0V using the DIP switches. Different settings are required for 2S and 3S batteries!
2. Before powering on, set the transmitter's throttle trim to 0% at neutral.
3. Increase the distance between the transmitter and the car to avoid signal interference.
4. For optimal performance, we recommend using a 3S Lipo battery.

Features:

• INJORA MBL32 ESC based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable.
• The MBL32 ESC features a built-in BEC with adjustable output: 6V/7.4V
• Smooth and linear at low speeds, powerful and aggressive at high speeds.
• Runs more quietly than brushed systems, producing virtually no noise.
  
• 1721 Purple Viper outrunner motor, equipped with a mounting plate to mount the motor on the TRX4M transmission.
• Plug-and-Play Convenience: Includes multiple adapter cables for different battery connectors.
  

ESC Specifications:

• Part Number: MBL32 (MBL: Micro Brushless)
• Max.Current: 30A
• LiPo Cells: 2-3s
• Compatible Motors: INJORA 1721/2204 
• Applications: 1/18 1/24 RC Crawlers
• BEC: Max 3A
• BEC Output: 6.0v/7.4V (adjustable by DIP switch)
• Motor Connectors: PH2.0 3Pin
• Dimensions(L*W*H): 30*22*11mm 
• Weight: 16g
• Waterproof: No

Motor Specifications：

• Model Number: 1721
  
• Motor Type: Sensorless Brushless Outrunner
  
• RPM/Volt: 2800KV
  
• Motor Poles: 14
  
• Sine Mode Power: 7
  
• No-Load Current (11.1V): 0.7A
  
• Max Peak Current: 30A
  
• Motor Connectors: PH2.0 3Pin
  
• Dimensions: Φ16.7*20.9mm
  
• Motor Qutput Shaft Diameter: Φ2mm
  
• Motor Pinion: 0.4mod 11T
  
• Weight: 19g
• Waterproof: Yes